Grinder Mixer Roller Mills CATTLEMAXX 7165 GRINDER MIXER
• 165 bushel capacity tank
• 30 inch heavy duty roller mill
• 540 RPM PTO Drive
• Mixing Auger 12 inch diameter
• 5 Large inspection windows
• 10 inch diameter x 12 foot long unloading Auger w/ hydraulic lift cylinder
Features
Mixing Tank
Art’s Way’s 7165 Grinder Mixer features a 165 bushel mixing tank rated at 4 tons.
- 5 Large Inspection Windows
- Nonslip Ladder
- Mixing Auger 12 inch diameter
Rollermill
- 30 inch, 10 inch diameter rolls
- Sharp or Flat Grooves
- 1:1 or 1:1.12 Roll Speed Differential
Tube Style Auger Feeder
A tube style auger feeder provides better material flow in order for more efficient feeding.
- Optional Hydraulic lift
- 10 inch diameter
- 100 inches long
Transition Auger
- More consistent material flow from the mixing tank to the discharge auger as a result of double flighting.
- Flight extensions offer more movement in the transition auger for foliage such as hay. Therefore, not recommend for grain only mixing.
Discharge Auger
Operated by optional wireless remote control due to the full contained hydraulic system for swinging the auger, up/down movement, and transition gate open/close movement.
- Auger Tube has a 10 inch diameter
- Horizontal operating arc: 225º
- Vertical operating arc: +46º to -27º or +60º to -11º
- 10 feet longOptional Auger Extensions
Hydraulic System
- Easy operation because of the fully contained hydraulic system with optional wireless remote control.
- 11 gallon tank has a shorter warm up time while allowing for more affordable fluid changes.
- NEW hydraulic cooler in addition to the smaller tank. This automatically turns on when your oil temperature rises and likewise, reverses when necessary. This also remains off when not needed.
- Check out the new hydraulic cooler!
*Tractor Hydraulics also available.
Drive System
- Beefed up jack shaft and bearing withstand the stress from your tractor.
- Overrunning P.T.O shaft allows for smooth shutdown.
- 80-160 Horse Power requirement
Supplement Hopper
- 21 inches x 24 inches
- 7 inch diameter auger
Safety Features
- LED transport lights
- Plated jack for stability
Specs
| Capacity of Mixing Tank | 165 bushel (205.3 cu. ft.) |
| Width of Mill | 30 in. |
| Height (with tire size) | 126 in. |
| Overall Length | 175 in. |
| Width with Auger Feeder | 114 in. |
| Weight with Auger Feeder | 5,200 lbs. |
| Reversible Hammers | N/A |
| Screen Area | N/A |
| PTO Drive | 540 RPM |
| Operating Speed of Mill | 540 RPM |
| Horsepower Requirement | 50-120 hp |
| Auger Feeder Length | 96 in. |
| Auger Feeder Diameter | 10 in. |
| Auger Feeder Type | Hydraulic Tube |
| Diameter of Mixing Auger | 12 in. flighting/13 in. tube/24 in. base |
| Discharge Auger Tube Diameter | 10 in. |
| Discharge Auger Type (lift & swing) | Hydraulic |
| Unload Auger Reach 60° Angle | 20 ft. 3 in. (12 ft. Tube) |
| Unload Auger Reach 3 ft. Extension 60° Angle | 22 ft. 10 in. (12 ft. Tube) |
| Unload Auger Reach 6 ft. Extension 60° Angle | 25 ft. 5 in. (12 ft. Tube) |
| Supplement Hopper Size | 21 x 24 in. |
| Tires | 13.5 x 16.1 8 ply high flotation |
| Ground Clearance | 13 in. |
