Food Plot Seeder FPSB-6
The reliability of the time proven Brillion Sure Stand Seeders is the foundation upon which the Food Plot Seeder is built. Starting with the all welded, one piece steel frame, the Food Plot Seeder will not flex or slip out of adjustment. The unique floating three-point hitch is attached to the front of the frame. The 1... + Read More
Features
All in One Solution for Wildlife Food Plots
- 6' Model Available
- Three-Point Hitch - Cat. I, II Free Link
- Three-Point Hitch - Cat. I, II Quick Coupler Hitch
- Floating Link Allows Seeder to Pivot and Follow the Contour of the Land
- 18" Notched Disc Blades, Spaced at 7.5", Can be Adjusted to 10 or 15 Degrees Depending on Amount of Tillage Needed
- Two Rows of Mini S-Tine Cultivator Teeth
- Teeth are Spaced at 15" on Each Bar for a Nominal Spacing of 7.5"
- S-Tines are Fully Adjustable and Can be Removed if Only Disc Tillage is Required
- Double Seed Box Capacity
- Micro-Metered Box Will Plant Small Granular-Type Seeds at Precise Rates
- Seed Box Equipped with Brush Agitator Will Plant Larger Seeds and Seed Mixtures Containing a Variety of Seeds
- User Friendly Seed Rate Adjustments
- Seed Box Disconnect Klik Pin Disconnects the Seed Drive for Seed Rate Calibration and Prevents Wear and Tear on the Seed Box Drives in Tillage-Only Mode
- Positive Ground Driven Seed Metering System
- Pulverizer Roller Packs Seeds Into the Soil for Maximum Seed to Soil Contact
- 1.5" Self-Aligning, Greaseable Bearings Add to Ruggedness and Reliability of the Seeder
- Coil Tine Harrow Available for Additional Leveling
- Cargo/Rock Box Available
- Powder Coat Paint
Specs
| Model | FPSB-6 |
| Approximate Weight | 1,389 lbs. (625 kg) |
| Working Width | 6 ft. 0 in. (1.8 m) |
| Overall Width | 6 ft. 10 in. (2.05 m) |
| Overall Transport Height | Dependent Upon Tractor |
| Overall Height (Working) | 3 ft. 5 in. (1.03 m) |
| Overall Length | 5 ft. 8 in. (1.7 m) |
| Disc Assembly | |
| Blade Spacing | 7.5 in. (191 mm) |
| Blade Size (Main) | 18 in. (457 mm) x 9 ga. |
| Blade Size (End) | 16 in. (406 mm) x 11 ga. |
| Arbor Bolt | 1.125 in. (28.6 mm) Square |
| Gang Bearings | 1.125 in. (28.6 mm) Greaseable |
| Angle of Operation | 10 or 15 Degrees |
| Harrow Assembly | |
| Tooth Bars | 2 |
| Type of Teeth | 10" Mini S-Tines with Reversible Points |
| Tooth Spacing | Nominal 7.5 in. (191 mm) |
| Tooth Depth of Operation | 0 to 3 in. (76.2 mm) in 1 in. (25.4 mm) Increments |
| Under Bar Clearance | 11.5 in. (292 mm) |
| Seeder Assembly | |
| Seed Box Type | All Steel Construction with Cover |
| Seed Box Capacity | 2.625 bu. Each Box |
| Seed Meters | "Micro-Meter" and Brush Agitator |
| Seed Meter Drive | Positive Ground Driven with Disconnect |
| Seed Meter / Opening Spacing | 6 in. (152 mm) / 4 in. (102 mm) |
| Seed Delivery | Broadcast with Wind Deflector Tray |
| Pulverizer Assembly | |
| Working Width of Pulverizer | 6 ft. 0 in. (1.8 m) |
| Pulverizer Wheels | 9.5 in. (241 mm) Gray Cast Iron |
| Number of Wheels | 31 |
| Pulverizer Scraper | Standard |
| Pulverizer Axle Bearings | 1.5 in. (38.1 mm) Greaseable |
| Axle Size | 1.75 in. (44.5 mm) |
| Floating Hitch | Cat. I-II Quick Hitch Compatible |
| Micro-Meter Seed Box Kit | Standard |
| Brush Agitator Seed Box Kit | Standard |
| Coil Tine Drag | Optional |
| Cargo / Rock Box Kit | Optional |
| Posi-Drive Pulverizer Roller | Optional (In Lieu of Standard Pulverizer Assembly) |
| Powder Coat Paint, Red | Standard |
| Horsepower Requirements | 35 HP (26.88 kW) and up |
| Recommended Operating Speed | 3 to 5 MPH (5 to 8.3 km/h) |
