TH8-42 M74
Preparing for a job on a low-speed job site? Then get a machine that's built to deliver the power you need without the added expense and stress of DEF fluid. Get the TH8-42 M74 Telescopic Handler. Adapting to a wide variety of tasks to place material where it's needed, the TH8-42 M74 delivers the performance your work demands while giving you the opportunity to save on operating and maintenance costs. Plus, its perpendicularly mounted engine with 300 degrees of access further reduces labor downtime. With unmatched forward visibility, an easy-to-use joystick, and a simple interface that delivers vital and relevant information like wheel alignment and current boom angle, it's designed to allow operators with differing skill levels to take advantage of its stability and strength. From early morning staging to end-of-day cleanup, you can count on the TH8-42 M74—your right-hand person for the toughest jobs.
Max. capacity: 8000 lb
Max. lifting height: 42 ft 6 in
Max. outreach: 28 ft 6 in
I.C. Engine power rating: 74 Hp
Features
Key Features
- SUPERVIEW cab design for increased line of sight to forks and load
- Simple F-N-R joystick mounted to the seat for ease of use and operator comfort
- EASY STEP cab floor allows for clear visibility of the step for exit and entry
- digital display with 50 operator aid messages to assist in correct operation
- No DEF or DPF systems
- high visibility orange seat belt to verify operator use
- stability system for machine re-position within restricted range
| Capacities | |
| Max. capacity | 8000 lb |
| Max. lifting height | 42 ft 6 in |
| Max. outreach | 28 ft 6 in |
| Weight and dimensions | |
| Overall length to carriage | 20 ft 8 in |
| Overall length (with forks) | 24 ft 8 in |
| Overall width | 8 ft 2 in |
| Overall height | 8 ft |
| Wheelbase | 11 ft 6 in |
| Ground clearance | 1 ft 6 in |
| Overall cab width | 3 ft 1 in |
| Tilt-up angle | 34 ° |
| Tilt-down angle | 96 ° |
| External turning radius | 13 ft 1 in |
| Overall weight | 23951 lb |
| Tires type | Pneumatic |
| Forks length / width / section | 48 in x 4 in / 2 in |
| Frame leveling longitudinal +/- | 10 ° |
| Performances | |
| Lifting | 11 s |
| Lowering | 6 s |
| Extension | 17 s |
| Retraction | 11 s |
| Crowd | 4 s |
| Dump | 6 s |
| Engine | |
| Engine brand | Deutz |
| Engine norm | Tier 4 final |
| Engine model | TCD 3.6 L4 |
| Number of cylinders / Capacity of cylinders | 4 - 220 in³ |
| I.C. Engine power rating - Power (kW) | 74 Hp / 55 kW |
| Max. torque / Engine rotation | 288 ft/lbs @ 2300 rpm |
| Transmission | |
| Transmission type | Powershift |
| Number of gears (forward / reverse) | 5/3 |
| Max. travel speed | 20 mi/h |
| Parking brake | SAHR |
| Service brake | Wet disc brakes |
| Hydraulics | |
| Hydraulic pump type | Axial piston |
| Hydraulic flow / Pressure | 40 US gpm-4000 PSI |
| Tank capacities | |
| Engine oil | 2 US gal |
| Hydraulic oil | 36 US gal |
| Fuel tank | 38 US gal |
| Noise and vibration | |
| Noise at driving position (LpA) | 80 dB |
| Miscellaneous | |
| Steering wheels (front / rear) | 2/2 |
| Drive wheels (front / rear) | 2/2 |
