HB Series Hopper Broom HB74
KUBOTA BY LAND PRIDE: The HB74 Hopper Broom's 26" diameter brush uses poly, wire, or combination poly and wire bristles to sweep dirt, aggregate, or other light debris and trash in to the bucket. The bucket shell is 3/16" steel and features a bolt-on cutting edge as standard equipment. The HB74 and HB84 are manufacture... + Read More
Features
| Features | Benefits |
| Available in 74" ( 1.88m) and | Provides for excellent productivity and ideal sizes for most skid steers and compact |
| 84" (2.13 m) working widths | utility tractors. |
| Connect under pressure hydraulic couplers | Coupler are easier to connect and disconnect under pressure. |
| Direct drive motor | Improves efficiency. |
| Forward and rearward travel | Broom can operate while traveling forward or backward. Gutter broom must be shut off when operating backward. |
| 26" (66 cm) Bristle diameter | Provides for long service life. |
| Choice of poly, wire, or combination | Allows owner/operators to meet operational needs. Poly/wire combinations provide |
| poly/wire bristles | more wear life and more aggressive sweeping action. |
| Easily removable brush drive | Allows for quick and easy change out of wafers. If included, only case drain hydraulic line must be disconnected. |
| Adjustable broom hood | Broom hood can be adjusted down as the bristles wear to extend the life of the broom. |
| Reversible & replaceable cutting edge | Increases cutting edge life and can be replaced when worn out. |
| Compatible with 12- 25 gpm (45-95 Lpm) hydraulic flow | Allows attachment to a wide range of skid steers. |
| Up to 230 rpm brush rotation | Provides for good sweeping action and material control. |
| Rubber dust deflector flap | Helps keep dust levels under control and down and under the broom hood and out of the operators field of vision. |
| Optional gutter broom | Makes it easier to clean curbs and along side buildings. Adds 12" (30.5 cm) to the cleaning width. |
| Optional dust suppression kits | Wets the dust before sweeping it to help keep airborne dust down to a minimum. |
Specs
| Model Number | HB74 |
| Hitch | Skid steer quick attach, meets ISO 24410 |
| Weight of base unit without broom | 1030 lbs (467 kg) |
| Broom weights Poly broom Wire broom Combination broom |
222 lbs (101 kg) 222 lbs (101 kg) 222 lbs (101 kg) |
| Optional weights Gutter broom Dust suppression Dust suppression (Main & gutter broom) |
101 lbs (46 kg) 194 lbs (88 kg) 197 lbs (89 kg) |
| Overall width | 82" (2.08 m) |
| Overall height | 46" (1.17 m) |
| Wafers Poly broom Wire broom Combination broom |
36 Poly wafers 36 Wire wafers 18 Poly & 18 wire wafers |
| Sweeping width | 74" (1.88 m) |
| Sweeping width with gutter broom | 86" (2.18 m) |
| Broom diameter | 26" (66 cm) |
| Broom rotor shaft Without gutter broom With gutter broom |
Quick change broom core with no hydraulic hose disconnect in changeover. Quick change broom core with return to sump hydraulic hose disconnect only. |
| Square drive system | Replaceable |
| Broom bristle type | 100% Poly, 100% wire, or 50% poly and 50% wire |
| Hydraulic gpm range | 12-25 gpm (45-95 Lpm) |
| Minimum hydraulic flow required | 12 gpm (45 Lpm) @ 2000 psi (13.8 mPa) |
| Maximum hydraulic pressure rating | 3500 psi (24.1 mPa) |
| Broom speed range | 100 - 230 rpm |
| Hydraulic rotor drive motor | Single motor drive standard |
| Hydraulic hoses | Standard |
| Hydraulic couplers | Standard flat faced couplers |
| Bucket shell thickness | 3/16" |
| Bolt-on cutting edge | Standard 5/8"x 8" |
| Broom hood thickness | 12 ga sheet metal |
| Optional water tank capacity | 25 gal (95 L) |
