HD25 Series Post Hole Diggers HD25
The Land Pride HD25 Series Post Hole Diggers are hydraulically driven and accommodate augers ranging from 6" to 24" in diameter. They are available with a bolt-on mount for mounting to the side of a bucket on a tractor front-end loader or with a boom for mounting to a category 1 or 2 three-point hitch. The digging perf... + Read More
Features
FEATURES | BENEFITS |
3-Point Cat. 1 or 2 Hitch | Fits a wider variety of tractors by fitting Cat. 1 & 2. |
Bucket Mount Option | Easily bolt mounting plate to the side of the front loader bucket, and use the bucket to help push the auger into the ground |
3-Point yoke: 2 7/8" O.D. | 3/16" wall thickness for strength and durability. |
3-Point boom: Reinforced 3 1/2" O.D. |
7/32" Wall thickness reinforced with 3/8" x 2" bar makes for a strong boom. |
Large selection of augers | Variety of Dirt Auger and Rock Auger sizes and styles to suit many applications. |
Large selection of Bolt-on Rock Heads (accessory) |
All sizes of Land Pride HD25 and HD35 Pengo Dirt Augers can be converted to Rock Augers with this accessory. |
Auger flighting | Constant thickness on 1/4" flighting vs. tapered. |
Replaceable cast alloy steel point with 3 fishtail tips |
3 Fishtail tips will last 50% longer than 2 tips. Cast alloy steel point can easily be replaced when worn or damaged. |
Replaceable dual angle teeth | Dual angle teeth can be changed from 40° to 50° to increase attack angle. Teeth can easily be replaced when worn or damaged. |
25 Series | Use with hydraulic systems that pump at 5 –12 GPM, at 1500 – 3500 PSI. |
35 Series | Use with hydraulic systems that pump at 10-25 GPM, at 1500 – 3500 PSI. |
2" Output shaft | 2" Handles torque loads that can be transmitted from hard ground. Fairly standard size for the industry, fits many competitive augers. |
Hydraulic hose | Standard on 3-point Post Hole Diggers and skid/loader mount Post Hole Diggers. Optional on bucket mount Post Hold Diggers due to distance varying on tractor models. |
6", 9", 12", & 18" Diameter auger options |
Wide range of auger diameters to choose from. |
48" Auger Length | Auger is provided in industry standard length. |
Specs
Specifications & Capacities | |
Models | HD25 |
Mount Type | 3- Point Mount | Skid/Loader Mount | Bucket Mount Cat 1 or II |
Hitch type | 3- Point Mount | Skid/Loader Mount | Bucket Mount Cat 1 or II |
Hydraulic hoses | Standard | Standard | Optional |
Auger drive | Hydraulic |
Gallons per minute rating | 5 -12 gpm @ 1500 to 3500 PSI (18.9-45.4 Lpm @ 103-241 Bar |
Max torque @ 2500 PSI | 700 ft-lbs |
Maximum auger rpm | 101 rpm |
Weight with 6" auger | 235 lbs (107 Kg | 268 lbs (22 kg) | 170 lbs (77 kg) |
Gearbox | 3.18:1 Ratio |
Gearbox oil capacity and type | 4.7 Pints (2.22 L) of gear lube 80-90W EP |
Output shaft on gearbox | 2" O.D. round |
Yoke | 2 7/8" O.D. | Not applicable | Not applicable |
Boom | Reinforced 3 1/2" O.D. | Not applicable | Not applicable |
Options | |
Dirt Auger diameters | 6", 9", 12", 15", or 18" (15, 23, 31, 38, & 46 cm) |
Rock Auger diameters | 6", 9", 12", 15", or 18" (15, 23, 31, 38, & 46 cm) |
Tree Auger diameter | 24" (61 cm) |
Auger teeth | Individually replaceable (Pengo teeth only: 40o angle on flat side or 50o angle on sloped side) |
Number of teeth | 6" - 2 teeth, 9" - 2 or 4 teeth, 12" - 4 teeth, 15" - 5 teeth, 18" - 6 teeth, and 24" - 10 teeth |
Auger Pilot | Cast steel with two or three drill points |
Auger length | "Dirt and Tree Augers: 48"" (122 cm) |
Rock Augers: 45"" (114 cm)" | |
Auger pipe | 2 1/2" dia. (6.4 cm) |
Auger flighting thickness | 1/4" (6 mm) |
Accessories | |
7" (18 cm) Auger Extension | Available, Weight = 9 lbs (4 kgs) |
14" (36 cm) Auger Extension | Available, Weight = 15 lbs (7 kgs) |
Hex Auger Adapter | Available, Weight = 12.4 lbs (5.6 kg) 2" (5.1 cm) Round hub to 2" (5.1 cm) hex shaft |
Bolt-on Rock Heads | Available in 6", 9", 12", 15", or 18" diameters |
Skid/Loader Quick Hitch Mount | N/A | Available | N/A |
PD storage stand | Available | N/A | N/A |
Hydraulic Down Pressure Kit | Available | N/A | N/A |