SA35 Series Post Hole Diggers SA35
Kubota by Land Pride: The SA35 Series Post Hole Digger meets the industrial duty applications of nurseries, landscapers, contractors, construction companies, and municipalities. With augers from 6" to 36" diameter, no job is too big or too small. Only available through Kubota Dealers.
Features
| FEATURES | BENEFITS |
| Skid steer type quick attach that meets SAE | Fits most Skid Steers Easy hook-up and unhook capabilities Loader arms can be used to apply additional down force. |
| Maneuverability | Skid Steer Post Hole Diggers are able to reach over fences or other obstructions. |
| Replaceable hardened steel points on auger | Hardened points will last longer than non-hardened. Points are replaceable. Fish tail tips and steel point make it easier to start a hole. |
| SA35 Series | Fits 10 - 30 gpm hydraulic systems |
| Output shaft options | 2” Hex shaped output shaft, or 2-9/16” shaft. Both offer high torque resistance, with the hex shaft being the heaviest available. |
| Planetary gearbox | Design is a tougher, more construction grade than chain and sprocket designed gearboxes. Boxes are completely sealed with all moving parts running in oil for constant lubrication. |
| Large selection of augers | Variety of dirt, tree and rock auger sizes and styles to suit many applications |
| Large selection of Bolt-on Rock Heads (Accessory) | Pengo Dirt augers can be converted to Rock Augers with this accessory |
| Auger length | 46” on 9” Auger, 48” on all others. |
| Puff augers | Available with 2" hex hub or 2 9/16" round hub. Used for drilling 2" rock T-post holes in tough conditions. |
Specs
| Specifications & Capacities | SA35 | ||
| Skid Steer Hydraulic Requirements | 10 - 30 gpm @ 1500 to 3500 PSI (37.9 - 113.6 lpm @ 10.34 to 24.13 MPa) | ||
| Hydraulic Motor | 18.3 CID | ||
| Gearbox | Hydraulically driven planetary gearbox; reversible | ||
| *Output Torque | 2,732 ft-lbs (3703.5 Nm) based on 3,000 psi (20.68 MPa) @ 20 gpm (75.7 lpm) | ||
| Hitch | Skid steer type quick attach that meets SAE | ||
| Weight without Auger | 372 lbs (197.3 kg) | ||
| Auger Length | 9" Auger size = 49" (1.24 m) All other auger sizes = 50 3/4" (1.29 m) |
||
| Auger Flighting Thickness | 5/16" (8 mm) | ||
| Auger Pipe | 2 1/2" (6.4 cm) ID | ||
| Auger Teeth | Forged, Individually Replaceable. 40 Degree angle installed on flat side and 50 degree angle installed on angled side | ||
| Number of Teeth | Dirt Augers 6" - 2 teeth 9" & 12" - 4 teeth 15" - 5 teeth 18" - 6 teeth 24" - 8 teeth 30" - 10 teeth 36" - 12 teeth |
Tree Augers 24" - 9 teeth 30" - 11 teeth 36" - 13 teeth |
Rock Augers 6" - 6 teeth 9" - 10 teeth 12" - 12 teeth 15" - 14 teeth 18" - 16 teeth 24" - 20 teeth |
| Pilot | Cast Steel, 3 -Drill Points | Cast Steel, 4 - drill points | |
| Hex hub puff auger Part# .317-318A RND hub puff auger Part# 317-318A |
2" (5.1 cm) Pilot bit x 2" (5.1 cm) hex hub x 38.7" (98.3 cm) overall length 2" (5.1 cm) Pilot bit x 2 9/16" (6.5 cm) round hub x 38.7" (98.3 cm) overall length |
||
| Options and Accessories | |||
| Gearbox Output Shafts (Options) | 2" (5.1 cm) Hex shaft or 2 9/16" (6.5 cm) round shaft | ||
| Auger sizes (Options). | Dirt, 2" (5.1 cm) hex hub: 6", 9", 12", 15", 18", 24", 30", & 36" Dirt, 2 9/16" (6.5 cm) round hub: 9", 12", 15", 18", 24", 30", & 36" Tree, 2" (5.1 cm) hex & 2 9/16" (6.5 cm) round hubs: 24", 30" & 36" |
||
| Bolt-on Rock Head (Accessory) | 6", 9", 12", 15", 18", & 24" | ||
| Auger Extensions (Accessories) | 2" (5.1 cm) Hex extension: 24" & 48" Extensions Available 2 9/16" (6.5 cm) OD round extension: 24" & 48" Extensions Available |
||
