x
White's Farm Supply

Land Pride BSR10

New Equipment / All Lines / Land Pride / Material Handling / BSR10 Series Bale Spears / BSR10
Land Pride BSR10 for sale at White's Farm Supply

Double tap to zoom

Land Pride BSR10 for sale at White's Farm Supply

BSR10 Series Bale Spears BSR10

The BSR10 is a 3-Point Cat I or Cat II Bale Spear intended for moving bales up to 1,800 lbs. It features a single, forged 49” steel spear with a 44” usable length mounted to a 3” x 3” tube frame. To keep the bale from rolling, the BSR10 also has two replaceable 19” stabilizer spikes.

 

Features

Features Benefits
Designed to fit Cat.I & Cat. II 3-Point hitches Works well with a lot of tractors
3-point is Quick Hitch compatible Easy to hook-up and unhook with a Quick Hitch. Bale Spear must be supported on blocks to use the Quick Hitch.
Replaceable spear and spikes Spears and spikes are easily replaced if damaged.
Bales can be pushed with a single spear Good for pushing bales onto side dump trailers.
Spear punches a hole in end of bale not in the circumference Very little moisture can enter the bale where spears punch. Grappling type bale lifts punch holes in the circumference allowing moisture to penetrate the bale and accelerates bale deterioration
Single spear includes two short bale spikes Bale spikes keep bale from rotating on the single spear.
Single spear takes less force to push the spear into the bale Bales of all sizes won't shift positions as easily while pushing the spear into the bale. Single spears are ideal for lifting smaller lighter bales.

Specs

Model BSR10
Frame lift capacity
24" from face of frame		 1 - Round bale
up to 2,000 lbs
3-Point hitch category Cat. I & Cat. II
Quick Hitch Compatible Yes, if Bale Spear is supported on blocks.
Spear diameter 1 3/4"
Number of spears 1
Spear overall length 49"
Spear probe length
Face of frame to end of point		 44 1/2"
Weight of unit 112 lbs.
Number of spikes 2
Spike diameter and probe length 1 1/4"
Spike probe length
Face of frame to end of point		 14"