RCF2084 Rotary Cutters RCF2084
The Land Pride smooth-top RCF2084 Rotary Cutter will quickly tackle pastures and light brush with its 84" cutting width and 2" cutting capacity. The floating top link permits the deck to follow the terrain for an even cut. This cutter has a Category I and II 3-Point hitch that is Quick Hitch adaptable. The standard ASA... + Read More
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| Gearbox Seal Protection | Gearbox bottom seal protection for longer bearing life. |
| Cat. 4 drive-line with 2-plate slip-clutch | Slip-clutch drive-line offers convenience for continual work. |
| Dual position clevis type 3-Point floating top link | Permits deck to follow the terrain for an even cut. |
| Lower clevis type 3-Point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Heavy 10 gauge deck & side skirt construction | Can withstand more abuse than lighter gauge decks. |
| Box tubing deck supports | Makes for a stronger rigid deck. |
| Fully welded deck | Adds additional strength. |
| Extended cutter front | For increased material flow and added protection. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| 11 15/16" Deck Height | Allows cutter to handle heavy cutting conditions. |
| 1 1/2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| Full length skid shoes | Provides sidewall reinforcement and full protection to bottom of sidewall. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 3/16" x 27" Oval stump jumper | Standard Oval stump jumper slides over stumps, rocks and debris. |
| High blade tip speed | Ensures clean cut. |
| 15" Laminated tail-wheel | Laminated material is long lasting in rough conditions. Can't go flat. |
| 1 1/4" Heavy-duty spindle on tail-wheel | Tail-wheels take a beating, spindle gives the strength to protect tail-wheel assembly. |
| Optional Front Guarding | Protect against flying debris. Customer can choose to include single chain or rubber guarding. |
| Optional Rear Guarding | Protect against flying debris. Rear Metal Band is standard. Customer can choose to include single chain guarding. |
| Drive-line Holder | Keeps drive-line up out of dirt. Easier hook up of drive-line. |
Specs
| Specifications & Capacities | |
| Machine Weight: Single Tail-wheel Dual Tail-wheel |
1,047 lbs. with Front Rubber Guard and Rear Metal Band. 1,155 lbs. with Front Rubber Guard and Rear Metal Band. |
| Hitch | Category l & II with floating top linkage, Quick Hitch ready |
| Cutting Width | 84" |
| Overall Width | 89" |
| Overall Length: Single Tail-wheel Dual Tail-wheel |
133 1/4" 126" |
| Deck Height (Bottom of Deck to Bottom of Skid Shoe) | 11 15/16" |
| Cutting Height | 1 1/2" to 12" |
| Cutting Capacity | 2" Diameter |
| Recommended tractor hp | 45-90 hp |
| Power take-off speed | 540 rpm |
| Gearbox Ratio | 1:1.44 |
| Gearbox Construction | Speed-up beveled gears, cast iron housing, 1 3/8"-6 spline input shaft and 2" output shaft |
| Gearbox Oil Capacity & Type | 7 Pints of EP 80-90W oil |
| Deck Construction | All welded deck |
| Deck Material Thickness | 10 Gauge (.134") |
| Side Skirt Material Thickness | 10 Gauge (.134") |
| Skid Shoes: Standard Accessory |
Full length weld-on skid shoes 1/4" x 2 1/2" x 18 7/16" Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes) |
| Stump Jumper | 3/16" x 27" Oval Pan with 1" thick blade holder bar |
| Blades (2) | 1/2" x 4" x 31" Heat treated alloy steel free-swinging high lift |
| Blade Bolts | Keyed with harden flat washers & lock nuts. |
| Blade Tip Speed | 17,113 FPM |
| Drive-line | ASAE Category 4 |
| Drive-line Protection | 2 Plate slip clutch |
| Tail-wheel Mount | Welded A-arm and caster fork with 360 degree swivel |
| Tail-wheel | 4" x 8" x 15" Laminated tire with cast iron hub |
| Front Guard: Optional Optional |
Rubber Belting Single Chain Guard |
| Rear Guard: Standard Optional |
Metal Band Single Chain Guard |
