RCF2760 & RCF2772 Series Rotary Cutters RCF2760
The RCF27 Series Rotary Cutters is a smooth top version of our RCR26 Series, offering the same great cut and ideal for grass, weeds, crops, brush and small trees up to 3 inches in diameter. These units come equipped standard with a 3/16" thick heavy-duty stump jumper and replaceable bolt-on skid shoes. Optional shields... + Read More
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| 130 HP gearbox | A rugged heavy built gearbox capable of handling heavy cutting applications. |
| Gearbox Seal Protection | Gearbox bottom seal protection for longer bearing life. |
| Cat. 4 drive-line with 4-plate slip-clutch | Slip-clutch drive-line offers convenience for continual work. |
| Lower clevis type 3-point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Heavy 10 gauge deck construction with 1/4" side skits | Can withstand more abuse than lighter gauge decks. |
| Box tubing deck supports | Makes for a stronger rigid deck. |
| Fully welded deck | Adds additional strength. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| 11 1/4" Deck Height | Allows cutter to handle heavy cutting conditions. |
| 1 1/2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| High cutting capacity | Can cut brushy areas with saplings up to 3". |
| Skid shoes | Provides sidewall reinforcement and protection to bottom of sidewall. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 3/16" Plate stump jumper | Standard round stump jumper slides over stumps, rocks and debris. |
| High blade tip speed RCF2760 = 12,384 FPM RCF2772 = 14,861 FPM |
Ensures clean cut. |
| Laminated tail-wheel | Laminated material is long lasting in rough conditions. |
| 4" x 15" Solid rubber tail-wheel | Can't go flat. |
| 1 1/2" Heavy-duty spindle on tail-wheel | Tail-wheels take a beating, spindle gives the strength to protect tail-wheel assembly. |
| Optional Guarding | Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and single chain guarding on the back. |
| Driveline Holder | Keeps driveline up out of dirt. Easier hook up of drive-line. |
Specs
| Model Numbers | RCF2760 |
| Machine Weight | 955 lbs. (433.2 kg) With front and rear Single Chain Guards |
| Hitch | Category I or II with floating top linkage, Quick Hitch ready |
| Cutting Width | 60" (1.52 m) |
| Overall Width | 67" (1.70 m) |
| Overall Length | 109" (2.77 m) |
| Deck Height (Bottom of Deck to Bottom of Skid Shoe) | 11 1/4" (28.6 cm) |
| Cutting Height | 1 1/2" - 12" (3.8 cm - 30.5 cm) |
| Cutting Capacity | 3" (7.6 cm) Diameter |
| Recommended Tractor hp | 35-130 hp (26.1-96.9 kw) |
| Power Take-Off Speed | 540 rpm |
| Gearbox | 540 rpm power take-off driven gearbox, 1:1.44 speed-up beveled gears, cast iron housing, 1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft |
| Gearbox Lubricant | EP 80-90W oil |
| Gearbox oil Capacity | 7 pints (3.31 L) |
| Deck Construction | All welded deck |
| Deck Material Thickness | 10 Gauge (3.4 mm) |
| Side Skirt Material Thickness | 1/4" (6 mm) |
| Skid Construction | Replaceable bolt on skid shoes |
| Stump Jumper | 3/16" x 24" (0.5 cm x 61.0 cm) Round Pan |
| Blades (2) | 1/2" x 4" x 25" (1.3 cm x 10.2 cm x 63.5 cm) Heat treated alloy steel free-swinging high lift |
| Blade Bolts | Keyed with harden flat washers & lock nuts. |
| Blade Tip Speed | 12,384 FPM (62.9 mps) |
| Drive-line | ASAE Category 4 |
| Drive-line Protection | 4 plate slip clutch |
| Tail-wheel Mount Assembly | Welded A-arm and caster fork with 360 degree swivel |
| Tail-wheel | 4.00" x 8" x 15" (10.2 cm x 20.3 cm x 38.1 cm) Laminated tire with cast iron hub and tapered roller bearings |
| Front Guard | Optional: Rubber Belting or Single Chain Guard |
| Rear Guard | Single Chain Guard |
