Landoll 2112-13

Landoll 2112-13 for sale at White's Farm Supply

Double tap to zoom

Coulter Chisel with Rigid Shear Bolt Shanks 2112-13

Manage heavy residue conditions at higher speeds with maximum efficiency with the Landoll 2100 Coulter Chisel.

Features
Specs

Features

Size Heavy Residue and Eliminate Compaction

22” Coulters on 7 ½” Spacing with Depth Gauge Indicator
1 ¾” Gang Bolt
5 ¾” Solid Cast Spools
C-Cushion Bearing Standards with Trunnion Bearings with Triple Lip Seal
Scraper Mounted Bracket Attached to C-Cushion Bearing Standard
Auto-Reset Shank Assemblies with 1,750 lb. Point Load, 14” Trip Height, 32” Under Frame Clearance, Adjustable 50 or 60 Degree Point Angle
Rigid Shear Bolt Shanks with 32” Under Frame Clearance
Choice of Twisted Shovels or Straight Points
5 ½” Lift Axles with Maintenance Free Lift System
Walking Tandems with Greaseable Bearings on all Sizes
340/65R x 18 Radial Tires with 8-Bolt Hubs and 3” Slip-In Spindles on Rigid Models and Wings of Folding Units
400/60R x 18 Radial Tires with 8-Bolt Hubs and 3 ¼” Slip-In Spindles on Center Sections of Folding Units
Self-Leveling Hitch with Manual Adjustment
Single Point, Front Mounted Depth Control
Adjustment and Gang Wrench
Sapphire Blue Powder Coat Paint

Product Attributes	2112-13
Approximate Weight	15,678 lbs. (7,111 kg)
Working Width	16 ft. 3 in. (5.0 m)
Transport Width	16 ft. 10 in. (5.1 m)
Transport Height	N/A
Number of Coulter Blades	27
Blade Spacing	7.5 in. (191 mm)
Blade Size	22 in. x 0.25 in. (559 x 6.4 mm)
Coulter Protection	Spring Cushioned/C-Flex
Blade Scrapers	Heavy-Duty 0.3125 in. x 6 in. (7.9 x 152 mm)
Blade Scraper Mount	C-Cushion Mounted
Gang Spools	5.75 in. (146 mm) Diameter Solid Cast
Gang Shaft	1.75 in. (44.5 mm) Round
Number of Bearings	6
Gang Bearing Type	C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Number of Shanks	13
Shank Type	Rigid Shear Bolt
Shank Spacing	15 in. (381 mm)
Shank Mounts	Wrap-Around Design
Shank Arms	5 in. x 3 in. x 0.375 in. (127 x 76.2 x 9.5 mm)
Trip Height	14 in. (356 mm)
Shank Size	1.25 in. x 2.5 in. (31.8 x 63.5 mm)
Standard Shovels	4 in. (102 mm) Twisted
Point Angle	50 or 60 Degree
Shank Offset	12 in. (305 mm) on Rear Bar
Under Frame Clearance	32 in. (813 mm)
Frame	6 in. x 4 in. x 0.375 in. (152 x 102 x 9.5 mm)
Frame Construction	Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles	5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type	Walking Tandems with Greaseable Pivots
Tire Size - Main Frame	(4) 340/65R x 18 Radial Tires
Wheel Hubs - Main Frame	8-Bolt
Spindles - Main Frame	3 in. (76.2 mm) Slip-In Spindles
Tire Size - Wing Frame	N/A
Wheel Hubs - Wing Frame	N/A
Spindles - Wing Frame	N/A
Hitch Type	Self-Leveling with Manual Adjustment
Hitch Category	Cat. IV Ball, Single Lip with 2 in. (50.8 mm) Hole
Machine Depth Control	Single Point, Front Mounted
Weight Kits Needed	With Attachment - 3 Required
Safety Warning Lights and SMV Emblem	Standard
Safety Chain Kit	Standard
Adjustment Wrenches	Standard
Powder Coat Paint, Blue Sapphire	Standard
Cat. III Single Lip Hitch Clevis	Optional
Cat. IV Single Lip Hitch Clevis	Standard
Cat. V Single Lip Hitch Clevis	N/A
2 in. Straight Points	Optional
3 in. Twisted Shovels	Optional
Rear Hitch	Optional
Rear Hitch With Hydraulic Hoses	Optional
Spare Tire & Wheel Assembly	Optional
Horsepower Requirements	20 to 30 HP (15 to 22 kW) per Shank

Amount Financed ($)
Interest Rate (%)
Loan Term in Months
Monthly Payment	Calculated

Coulter Chisel with Rigid Shear Bolt Shanks 2112-13

Features

Specs

New Products

Our Locations

Get A Quote

Request Brochure

Loan Calculator