x
White's Farm Supply

Lane Shark LANESHARK LS-2

New Equipment / All Lines / Lane Shark / Brush Cutter / THE LANE SHARK / LANESHARK LS-2
Lane Shark LANESHARK LS-2 for sale at White's Farm Supply

Double tap to zoom

Lane Shark LANESHARK LS-2 for sale at White's Farm Supply

THE LANE SHARK LANESHARK LS-2

The LS-2 is the only patented, multi-position brush cutter for tractors with a minimum weight of 3,000lbs and a hydraulic flow range of 8.5-20gpm. Supported by a cutting diameter of 44”, the LS2 can tackle overgrown vegetation and cut the time spent on brush clearing jobs by more than half, and with 11 cutting position... + Read More

 

Features

LANE SHARK LS-2 COMPATIBILITY:

  • Hydraulic implement flow rate 8.5gpm to 20gpm
  • If your tractor meets the specifications for an LS-2, but has a hydraulic flow rate between 15-20gpm, you will need a high capacity LS-2
  • Hydraulic rear remotes or third function. ONLY Pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
  • Minimum dry tractor weight of 3000 lbs
  • Minimum tractor width of 55 inches
  • Certified roll over protection system
  • NOT COMPATIBLE WITH DIVERTER VALVES
  • For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.

 

LANE SHARK LS-2 DETAILS:

  • The Lane Shark LS-2 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
  • Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 11 positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
  • The Lane Shark LS-2 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
  • The Lane Shark LS-2 weighs just under 450 lbs.
  • When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
  • NOT COMPATIBLE WITH SKID STEERS

Specs

MODEL LS-2
HYDRAULIC FLOW RATE: SMALL MOTOR N/A
HYDRAULIC FLOW RATE: STANDARD MOTOR 8.5-15 GPM
HYDRAULIC FLOW RATE: LARGE MOTOR 15-20 GPM
WEIGHT 450LBS
DIMENSIONS 42"Lx48"Wx29"H
CUTTING DIAMETER 44"
CUTTING CAPACITY 2-3"
CUTTING POSITIONS 11
DECK CONSTRUCTION 1/8" Plate
Reinforced with 1/4"
BLADES 2, Double Sided
LOADER COMPATIBILITY SSQA, JD Hook & Pin,
Global/Euro (Adapter Required)
MINIMUM REQUIRED TRACTOR WEIGHT 3,000lbs
MINIMUM REQUIRED TRACTOR WIDTH 55"