x
White's Farm Supply

Lane Shark LANESHARK LS-3

New Equipment / All Lines / Lane Shark / Brush Cutter / THE LANE SHARK / LANESHARK LS-3
Lane Shark LANESHARK LS-3 for sale at White's Farm Supply

Double tap to zoom

Lane Shark LANESHARK LS-3 for sale at White's Farm Supply

THE LANE SHARK LANESHARK LS-3

The LS3, like the LS2, has the same multi-position cutting capabilities, but is manufactured specifically for smaller tractors. The LS3 comes equipped with a 32” cutting diameter, and is compatible with tractors with a minimum weight of 2000lbs and a hydraulic flow range of 5-8.5gpm.

 

Features

LANE SHARK LS-3 COMPATIBILITY:

  • Hydraulic implement flow rate 5gpm to 8.5gpm - Standard motor
  • Hydraulic implement flow rate 8.6gpm to 15gpm - High capacity motor (Special Order Only)
  • Third function or Lane Shark valve kit. ONLY pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS).
  • We do not recommend rear remote plumbing as some tractors may lose loader priority
  • NOT COMPATIBLE WITH DIVERTER VALVES
  • Minimum dry tractor weight 2000lbs
  • Minimum tractor width 55 inches
  • Certified roll over protection system
  • For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.

 

LANE SHARK LS-3 DETAILS:

  • The Lane Shark LS-3 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
  • Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 11 positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions.
  • The Lane Shark LS-3 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
  • The Lane Shark LS-3 weighs just under 320 lbs.
  • When purchasing the Lane Shark LS-3 brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum hose inside diameter of 3/8” is required.
  • NOT COMPATIBLE WITH SKID STEERS

Specs

MODEL LS-3
HYDRAULIC FLOW RATE: SMALL MOTOR 5-8.5 GPM
HYDRAULIC FLOW RATE: STANDARD MOTOR 8.5-15 GPM
HYDRAULIC FLOW RATE: LARGE MOTOR N/A
WEIGHT 320LBS
DIMENSIONS 34"Lx34"Wx29"H
CUTTING DIAMETER 32"
CUTTING CAPACITY 2-3"
CUTTING POSITIONS 11
DECK CONSTRUCTION 1/8" Plate
Reinforced with 1/4"
BLADES 2, Double Sided
LOADER COMPATIBILITY SSQA, JD Hook & Pin,
Global/Euro (Adapter Required)
MINIMUM REQUIRED TRACTOR WEIGHT 2,000lbs
MINIMUM REQUIRED TRACTOR WIDTH 55"