SFC-21 SFC-21-7CV
THE BEST ON THE JOB OR AT HOME
The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time... + Read More
Features
EASY HEIGHT-OF-CUT ADJUSTMENT
FINE-TUNED AND SIMPLE
Easy height-of-cut adjustment allows for cutting heights from 1.5” to 4.5” in .5” increments.
SCAG LEVEL QUALITY-OF-CUT
PERFORMANCE FOR THE LONG HAUL
Strong, stamped steel deck ensures years of worry-free performance and a consistent cut.
GET MORE DONE WITH ONE MACHINE
DESIGNED FOR VERSATILITY
Capable of 3-in-1 versatility, giving you the ability to mulch, bag or side-discharge. Mulching and bagging attachments come standard; side-discharge accessory is available.
Side-discharge accessory available late Spring 2023.
BUILT TO LAST
DEPENDABLE, WORRY-FREE PRODUCTIVITY
Heavy-duty construction ensures years of dependable service and worry-free productivity.
STAY SAFE & EFFICIENT
SAFETY MEASURES THAT KEEP YOU WORKING
Blade brake clutch allows the operator to disengage the cutter blades without shutting off the machine.
POWERFUL TRANSMISSION & ENGINE COMBO
MAXIMUM POWER FOR TOUGH CUTS
Powerful and efficient Kohler® Command PRO® CV173 (5hp) or CV224 (7hp) engine delivers ample power, along with exceptional efficiency and dependable performance in the toughest of cutting conditions. Proven, maintenance-free GT MG 512 transmission delivers dependable 3-speed drive power.
STAY IN PRIME CONDITION
REPLACEABLE SIDE WEAR PROTECTION
Protecting both landscaping and the integrity of the cutter deck’s edge, these replaceable pads attach to the side of the mower and help minimize wear and tear between the environment you’re working in and your machine.
Specs
ENGINE & DECK COMBINATION
| Model | Description |
| SFC-21-7CV | 21" stamped steel cutter deck, Kohler® Command PRO® 224CV engine |
PRODUCT DIMENSIONS
| Product Dimensions* | SFC-21-7CV |
| Length in Operating Position | 63.0 - 68.5" |
| Length in Storage Position | 41" |
| Tracking Width | 21.2" |
| Width | 23.25" |
| Height in Operating Position (low / high) | 32.75" / 43.5" |
| Height in Storage Position | 22" |
| Weight (without bagger) | 138 lbs. |
| Weight (with bagger) | 143 l |
*Dimensions are approximate.
NOTE: Pre-production unit shown in photos. Actual product may vary. Specifications subject to change.
Because we strive to continually improve our products, Scag reserves the right to make changes at any time without notice or obligation.
SPECIFICATIONS
| Specification | SFC-21-7CV |
| GENERAL | |
| General Type | Heavy-duty industrial/commercial |
| Brand | Kohler® Command PRO® |
| Model | CV224 |
| Horsepower | 7HP @ 3300 RPM |
| Type | 4 cycle gas, OHV, air-cooled, single-cylinder, vertical shaft engine |
| Displacement | 224 cc |
| Cylinder | One with cast-iron cylinder bore |
| Governor | Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm |
| Air Cleaner | Quad-Clean™ four-stage, cyclonic air filter |
| Exhaust | Front discharge muffler with guard |
| Oil Pump Group | Steel oil pump; Full pressure lubrication with spin-on oil filter |
| Starter/Electrical | Easy-Pull™ recoil start |
| 50-State Compliant | |
| ENGINE DECK | |
| Thickness | 14 gauge |
| Fuel Tank | 1 gallon (3.785 liters) plastic tank |
| Wheels/Tires | Drive: 10.5 x 3 / Front: 9 x 2.25 |
| Handle Bars | 1" diameter, thick wall tubing, 3-position adjustable |
| DRIVE SYSTEM | |
| Type | Transmission |
| Transmission | GT MG 512 transmission, 3-speed |
| Steering/Travel Control | Variable drive control bar and 3-speed selector lever on handlebar |
| Transmission Output Shaft | 0.50" diameter |
| Safety Group | Handle actuated operator presence system |
| Forward Speed | Up to 4.25 mph |
| CUTTER DECK | |
| Type | High-vacuum, high-capacity design |
| Construction | 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped. |
| True Cutting Width | 21 inches (53.34 cm) |
| Cutting Height Adjustment | 1.5" to 4.5" in 0.5" increments |
| Cutter Blade | 0.1345 in. thick, milled edge, wear resistant |
| Blade Engagement | Blade control bar controlled Blade Brake Clutch (BBC). Connected to cutter blade. |
| Discharge Opening | Rear-discharge. Extra wide discharge opening. |
| Clutch Type | Heavy-duty Blade Brake Clutch (BBC) |
| OPTIONAL ITEMS/ATTACHMENTS | |
| Mulching Plug | Included |
| Fabric Grass Catcher | Included; 2.2 bushels (2.74 cu. ft.) |
| Side-Discharge Adapter | Available access |
