

SRT Series SRT-XDe
The XDe is equipped with the Kawasaki FT730V 24 hp engine in a 54" and 61" deck size. The Parker HJT 12cc transmissions and 24" Radial tires make this mower hard to beat.
Features
The Spartan SRT-XDe has all the deluxe bells and whistles of our XD Big Block with less expensive engines and drives. SRT-XDe models are the industry's best value in high end zero turn mowers.
- Front & Rear Radial Tires
- Rear Spring Suspension
- TecsPak® Underseat
- 360 Degree Seat Plate
- 3” Adjustable Seat
- LED Light Kit
- Aluminum Wheels
- 4 Bearing Spindles
- Adjustable Steering Arms
- 6” Deep Deck
- 11 mph Top Speed
- 18,500 FPM Blade Tip Speed
- Rear Stabilizing Wheels
- Parker HTJ 12cc Transmissions
Specs
ENGINE | |
ENGINE NAME | Kawasaki FT730V |
HORSEPOWER | 24HP |
FUEL CAPACITY | 9.5gal |
DRIVE LINE | |
HYDRAULIC DRIVE | Parker HTJ Transaxles - 12cc Drive Motors |
HYDRAULIC DRIVE TORQUE | Continuous - 262 ft-lb | Max Torque - 406 ft-lb |
HYDRO DRIVE MAINTENANCE | 1000 Hours Between Oil Changes |
DRIVE TIRES | 54" - 24x10.50-R12 Radial | 61" - 24x14-R12 Radial |
FRONT TIRES | 13x6.5-R6 Radial with Optional No Flats, or Tweels |
WHEELS TYPE | Aluminum rear wheels and front hub covers |
SPEED (F/R) | Forward - Up to 13mph | Reverse - Up to 5mph |
FEATURES | |
SEAT | Smart Ride Technology w/ full suspension seat - adjustable TecsPak Elastomer supports - 360 degree floating seat platform - indepentant rear frame section suspended by Winamac coil springs |
STEERING LEVERS | Soft-Touch Knobs to Adjust Forward and Back. Adjustable Up and Down |
CONTROL PANEL LCD DISPLAY | Engine Hour Meter - Mower Deck Hour Meter - Tachometer - Low Level Warning Volt Meter - Time Between Oil Change Countdown - Fault Codes |
CONTROL PANEL LED WARNING INDICATORS | Parking Brake Set - Drive Levers - Operator Present - PTO - Low/Hi Battery Volts - Low Oil PSI |
IGNITION | Keyless, Personal Code activated |
AUXILIARY POWER | 12v Outlet Next to Phone Holder |
STORAGE | Phone Holder, Cup Holder, and Deep Storage Tray |
HITCH | 2" Rear Receiver Standard |
CUTTING DECK | |
DECK SIZES | 54", 61" |
DECK DEPTH | 6" Deep, Reinforced 7 Gauge Full-Floating Deck |
DECK LIFT | Foot Operated with Shock Assist |
DECK ADJUSTMENT | Change-On-The-Go Precision Deck Height Dial |
CUT HEIGHT | Quick Adjust Dial from 1" to 5" with 15 Cut Heights |
BLADE SPINDLES | Cast Aluminum, No Maintenance/Sealed Bearings |
PARKING BRAKE | Foot Operated |
FRAME | 1.5" by 3" Powder Coated Fusion-Bonded Solid Steel Bridge Frame |
MEASUREMENTS | |
WIDTH | 61" Deck - 62.5" wide | 72" Deck - 73.5" wide |
WEIGHT | 61" Deck - 1192lbs | 72" Deck - 1216lbs |
LENGTH | 84" |
HEIGHT | 75" with ROPS Up - 54" with Folding ROPS Down |
WARRANTY | |
ENGINE WARRANTY | 3 Year |
FULL WARRANTY | 3 Year / 500 Hour Residential - 2 Year / Unlimited Hour Commercial - 120 Day Belt Warranty |
DECK WARRANTY | Lifetime on the leading edge |
HYDRAULIC DRIVE WARRANTY | 3 Year / 1500 Hour |
CONTROL PANEL WARRANTY | 3 Year |